Answer：The design of permanent magnet synchronous motors for automobiles is closely related to multiple disciplines such as electricity, magnetism, force, and heat. The motor design process mainly includes five parts: electromagnetic design, structural desi...
Answer：The driving motor and the driving motor controller are the core components in the driving system of new energy vehicles, which determine the main performance indicators of the vehicle, and play an important role in the driving performance, economy, s...
Answer：Most of the motor factories in China use the external press-fitting process when producing small motors. After the stator core is dipped and baked, the axial position must meet the requirements of the drawing when it is pressed into the frame, otherw...
Answer：The stator core is composed of sector pieces, ventilation slots, positioning ribs, upper and lower teeth pressure plates, tension bolts and supporting plates and other parts. The stator core is made of silicon steel sheets punched into fan-shaped pie...
Answer：The production of drive motors requires a large amount of special equipment. With the increase in labor costs and motor performance requirements, intelligent production will gradually replace traditional production equipment and become a future trend...
Answer：Asynchronous motors, commonly known as "induction motors", are based on the principle of adding a reactive element between the phase line and the neutral line of the power supply to balance the electromagnetic torque generated, so they are also
Answer：The winding is an important and key component of the motor product. The electromagnetic wire is an important part of the winding. The electromagnetic round wire enters the iron core in the form of loose embedding, while the electromagnetic flat wire ...
Answer：For motor parts, it is often not because of the special bluing treatment process, but a physical phenomenon produced during the production and processing of the motor, or during the operation of the motor.
Answer：According to the data, the synchronous reluctance motor works by using the torque generated by the uneven reluctance of the rotor. The rotor is composed of ferromagnetic materials and non-ferromagnetic materials. It has no permanent magnets and no wi...
Answer：The alignment of the coupling is also called the alignment. After the pump and the motor are installed, the last task is to find the concentricity between the pump and the motor, that is, to make the axis of the pump and the prime mover on the same s...
XINDAAll rights reserved(copyright) Shandong Xinda Motor Co., Ltd.
