The difference between geared motors and ordinary motors
The geared motor refers to the integration of the reducer and the motor (motor). This kind of integrated body can usually also be called a gear reduction motor or a gear reduction motor, and it is usually supplied in a complete set after being integrated and assembled by a professional reducer manufacturer. Geared motors are widely used in the steel industry, machinery industry, etc. The advantages of the popular miniature geared motors in the 21st century are that they simplify the design and save space, while the power, reduction ratio, and torque do not decrease. The deceleration motor generally achieves the effect of torque increase and deceleration by combining electric motors, internal combustion engines or other high-speed power equipment with gears of different sizes inside the deceleration motor. The following editor will introduce to you the "differences between geared motors and ordinary motors and the characteristics of geared motors".
![](/uploads/2023/01/200839587465.jpg)
1. The difference between geared motor and ordinary motor
1.1 See if there is a gear reducer.
Ordinary is a through shaft, all the parts are around, the power is directly transmitted to the ring gear of the engine, there are no bearings at the front and rear, only copper sleeves. The deceleration motor is divided into two parts, the rear end is the motor, and the front end is the planetary reduction mechanism, all of which are needle roller bearings and single groove ball bearings. The life of the deceleration motor is longer than that of ordinary motors. not tall.
The geared motor is generally an ordinary DC motor, but a gear reducer is added in front of the ordinary motor. The reducer is generally used for low-speed and high-torque transmission equipment. The power of the electric motor internal combustion engine or other high-speed operation is achieved by the gear with a small number of teeth on the input shaft of the reducer meshing with the large gear on the output shaft to achieve the purpose of deceleration. Ordinary deceleration The machine will also have several pairs of gears with the same principle to achieve the ideal deceleration effect, the ratio of the number of teeth of the large and small gears.
1.2 the characteristics of the geared motor
1.2.1 The deceleration motor is manufactured in accordance with international technical requirements, and has a high technological content.
1.2.2 Space-saving, reliable and durable, with high overload capacity, the power can reach more than 95KW.
1.2.3 Low energy consumption, superior performance, and the efficiency of the reducer is as high as 95%.
1.2.4. Small vibration, low noise, high energy saving, high-quality section steel material, rigid cast iron box body, and high-frequency heat treatment on the gear surface.
1.2.5. After precision machining, the positioning accuracy is ensured. The gear reduction motor that constitutes the gear transmission assembly is equipped with various types of motors, forming a mechatronic integration, which fully guarantees the quality characteristics of the product.
1.2.6 The product adopts serialization and modularization design ideas, and has wide adaptability. This series of products has extremely many motor combinations, installation positions and structural schemes, and any speed and various structural forms can be selected according to actual needs.