Answer:Whether the geared motor is powerful has nothing to do with the voltage, but with the rated power of the motor: the greater the rated power, the more powerful it is. The geared motor refers to the integration of the reducer and the motor. Usually, it...
Answer:Analysis of the naming rules of AC geared motors For example: YY 70 - 10 CZ
Answer:Last time we introduced the differences between the four series of reducers, today we will discuss the application of the four series of reducers to see what expertise they have. Summed up a few points.
Answer:The drive form of the micro geared motor can be divided into brush drive and brushless motor drive, single pulse waveform drive, sensor drive, brush drive and so on.
Answer:The planetary reducer is a mechanical transmission component that connects the servo motor and the applied load in the motion control system, and plays the role of matching speed, inertia and transmitting torque. The planetary reducer is a relatively...
Answer:The operation of the planetary gear reducer requires maintenance and replenishment of lubricating oil to improve efficiency, quality and service life. If you need to know, please refer to the following: lubrication method of planetary gear reducer, c...
Answer:Miniature geared motors are driving equipment with high torque and low speed, and are often used in various fields with large loads, such as electronic locks, safes, toy cars, electric fixtures, smart curtains, etc. Micro geared motor reducers are di...
Answer:Various faults will occur when the geared motor is in use, so it is necessary to find these faults and solve them. What should I do when the motor is fatigued and peeled off? The more common ones are pitting peeling, shallow fatigue peeling, and hard...
Answer:Reducer torque calculation formula: Reducer torque = 9550 × motor power ÷ motor power input revolutions × speed ratio × efficiency (60%-96%)
Answer:During work, when the oil temperature rises above 80°C or the oil pool temperature exceeds 100°C or abnormal noise occurs, stop using it, check the cause, eliminate the fault, and replace the lubricant After oiling, it can continue to run.