Keep the motor clean: In order to ensure the normal operation of the medium-sized reduction motor, you must pay attention to cleaning the reduction motor at ordinary times. Only by ensuring that the reduction motor is clean and dust-free can the normal operation of the reduction motor be guaranteed. If there is too much dust on the surface of the reduction motor, it may affect the working efficiency of the reduction motor and reduce the service life of the reduction motor.

　　Check whether the parts are misaligned: The reduction motor is a precision device with many parts. It is very likely that the parts will be misaligned during use. Therefore, you need to pay attention to this problem in daily inspection and maintenance, because the misalignment of parts is likely to cause some safety hazards.

　　Check whether the bearing needs to be replaced: After the reduction motor has been working for a long time, the bearing may be worn. In this case, the bearing needs to be replaced, otherwise the life of the reduction motor will be reduced if it is used continuously. If the bearing is not damaged, just add oil. Because the bearing is not easy to wear if it is sufficiently lubricated.

　　 The above are some issues that need to be paid attention to in the daily maintenance and inspection of medium-sized reduction motors. As long as these problems are handled properly, the service life of the reduction motor can be increased and some safety hazards can be avoided.