Speed regulating motor manufacturers talk about how to adjust the speed of transmission gear speed regulating motor

　　Speed regulating motor manufacturers talk about how to adjust the speed of transmission gear speed regulating motor

　　In specific application scenarios, the speed ratio requirements for machines and equipment are of different types. For example, the speed of the agitator shaft is different from the spindle bearing speed of the CNC lathe. At this time, a transmission gear speed control motor is needed. The change in speed ratio is very important, and it is also a problem that many professional and technical personnel are very concerned about when operating the machine.

　　Generally speaking, in industrial production strategies, the speed of the motor is adjusted in steps. This is also a relatively simple and convenient way to control the speed ratio, but its application is relatively limited, and it is only applicable to those devices with low operating frequency and small volume.

　　There is also a stepless speed regulation, which can be divided into foot-operated and electrical types. Foot-operated speed regulation is relatively stable and suitable for harsh environments. It is necessary to add a stepless speed regulation device to the equipment; for electrical type regulation, the multi-threaded motor is cascaded to regulate the speed.

　　In addition, when selecting a transmission gear speed regulating motor, a controller can be configured to adjust the power current and adjust the motor according to the changes in the power current.

　　It should be noted that the speed regulation of the motor can be divided into speed reduction and speed regulation. These are two different situations and must be clearly distinguished. If the motor controller is built-in, the speed ratio generally cannot be adjusted. If it is an external controller, it depends on the situation.

　　Speed regulating motor manufacturer: How to judge the quality of transmission gear speed regulating motor?

　　1. To determine whether the quality of the gear speed regulating motor is close, check whether the outer packaging box is clear and whether the stamp is clear. Generally, each brand product has a special product packaging and design.

　　2. Generally, manufacturers will use stamping technology to customize the logo mark, so the surface is quite deep and the font is very clear. If the logo printed on the surface of some products is blurred, it will make people feel that it is floating on the water. It is recommended to think carefully before buying.

　　3. Many people like to buy imported transmission gear speed regulating motors, but they cannot be purchased blindly, because they may buy counterfeit and inferior products. Before choosing, it is necessary to observe whether there is turbid oil on the gear reducer. Because there is a certain difference in rust prevention between domestic reducers and domestic and foreign reducers, there will be oil stains. However, imported reducers do not have oil stains.

　　4. You also need to ensure that you purchase it through formal channels, and do not purchase it from small factories. It may not be visible on the surface, but when you use it, you will find that the reducer is not only of poor quality, but also has poor wear resistance and a short service life. You also need to understand the reputation of the manufacturer. If the praise rate is high, you can rest assured to consume it.