1. Home
  2. Knowhow

Micro motor manufacturers tell you how to choose a micro reduction motor

Date:2023-11-21   Author:XINDA MOTOR

Micro reduction motors are widely used, but many people don’t know how to choose micro reduction motors. Xinda Motor is a micro motor and small motor factory with more than 20 years of technical experience. Next, engineers from Xinda Motor will share with you how to judge a micro reduction motor. The good and bad:

1. Look at the appearance. Because there is lubricating oil in the micro motor and gear reduction box, the lubricating oil cannot leak.

2. Listen to the sound. There should be no abnormal sound and the decibel value should not be too high.

3. Measure the parameters. The current cannot be too large and the motor cannot leak electricity.

4. Test whether it can meet the working conditions, such as whether the torque, speed and other performance meet the requirements.

5. Whether the service life meets the requirements. The life of the gearbox is mainly related to the following factors: 1. It is related to the load. It should be used within the specified load range for the best use conditions. 2. The life of the gearbox is related to the selection of materials. Gear materials are usually plastic, powder, metallurgy, etc. 3. The service life of the gear reducer is related to the operating conditions and frequency of use. For example, if the environment is harsh, the gears can easily wear out.

The above are some basic considerations when choosing a micro reduction motor. Of course, specific problems require detailed analysis. If you don’t know how to choose, you can send us the basic parameter requirements and our engineers will provide you with a scientific and reasonable micro reduction motor, geared motor solution. Customized consultation hotline: 18606382728 (same number on WeChat/whatsapp)