Gear reduction motor lubrication is an important part of reducer maintenance. When we chooseto use lubricating oil on geared motors , we need to know which kind of lubricating oil is suitable for geared motors. Next, XINDA MOTOR will talk about the selection of lubricating oil for gear reducers, hoping to help everyone.

gear reductionSelection of motor lubricating oil:

1. For motor lubricating oil, the appropriate lubricating oil type should be selected according to the working environment, load size, motion characteristics and friction form of the gear reducer. For high-speed moving gears, gear oil with low viscosity and good fluidity should be selected. For low-speed moving gears, it should be Choose lubricating oil with good anti-wear properties, and low-condensation gear oil should be selected for gears operating at low temperature.

2. Lubrication of the gear reducer is an important link in the maintenance of the reducer. The closed gear transmission with low speed is usually manually lubricated periodically, and the lubricant used is lubricating oil or grease.

3. For large reducers with low speed and heavy load, extreme pressure heavy-duty gear oil with high viscosity should be selected as much as possible, because it has better extreme pressure anti-wear performance, thermal oxidation stability and anti-corrosion than medium-load gear oil And rust resistance and excellent anti-emulsification performance, it is easy to form a chemical film on the meshing surface of the gear, so as to protect the tooth surface and reduce the wear of the reducer as much as possible.

4. Do not change the original lubrication scheme of the gear reducer. If it is oil lubrication, then it is changed to grease lubrication. If the lubrication is not in place or the heat generated cannot be dissipated, the thermal power of the reducer is not enough, and it is easy to break down.

When using lubricating oil for the gear reducer, you should also pay attention to it. You should try your best to ensure that the lubricating oil works under stable and suitable environmental conditions, and you must strictly follow the instructions in the relevant instructions step by step. The lubricator used for lubricating oil should be kept clean and free from other impurities or other pollutants.